Regviz

Freescale Semiconductor /MKV42F16 /ADC /CTRL1

Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text

Interpret as CTRL1

Share

Cut and paste this URL to share the unmodified register and value:

https://regviz.com/r/Freescale Semiconductor/MKV42F16/ADC/CTRL1#0x0

15 1211 87 43 0 0 0 0 00 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 (000)SMODE0CHNCFG_L 0 (0)HLMTIE 0 (0)LLMTIE 0 (0)ZCIE 0 (0)EOSIE0 0 (0)SYNC0 0 (0)START0 0 (0)STOP0 0 (0)DMAEN0

DMAEN0=0, STOP0=0, LLMTIE=0, EOSIE0=0, START0=0, SMODE=000, ZCIE=0, HLMTIE=0, SYNC0=0

Description

ADC Control Register 1

Fields

SMODE

ADC Scan Mode Control

0 (000): Once (single) sequential

1 (001): Once parallel

2 (010): Loop sequential

3 (011): Loop parallel

4 (100): Triggered sequential

5 (101): Triggered parallel (default)
CHNCFG_L

CHCNF (Channel Configure Low) bits
HLMTIE

High Limit Interrupt Enable

0 (0): Interrupt disabled

1 (1): Interrupt enabled
LLMTIE

Low Limit Interrupt Enable

0 (0): Interrupt disabled

1 (1): Interrupt enabled
ZCIE

Zero Crossing Interrupt Enable

0 (0): Interrupt disabled

1 (1): Interrupt enabled
EOSIE0

End Of Scan Interrupt Enable

0 (0): Interrupt disabled

1 (1): Interrupt enabled
SYNC0

SYNC0 Enable

0 (0): Scan is initiated by a write to CTRL1[START0] only

1 (1): Use a SYNC0 input pulse or CTRL1[START0] to initiate a scan
START0

START0 Conversion

0 (0): No action

1 (1): Start command is issued
STOP0

Stop

0 (0): Normal operation

1 (1): Stop mode
DMAEN0

DMA enable

0 (0): DMA is not enabled.

1 (1): DMA is enabled.

Links

()

Register License

Redistribution and use in source and binary forms, with or without modification,\nare permitted provided that the following conditions are met:\n o Redistributions of source code must retain the above copyright notice, this list\n of conditions and the following disclaimer.\n o Redistributions in binary form must reproduce the above copyright notice, this\n list of conditions and the following disclaimer in the documentation and/or\n other materials provided with the distribution.\n o Neither the name of Freescale Semiconductor, Inc. nor the names of its\n contributors may be used to endorse or promote products derived from this\n software without specific prior written permission.\n THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND\n ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED\n WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE\n DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR\n ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES\n (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;\n LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON\n ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT\n (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS\n SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

 ()

Register Reference

https://github.com/cmsis-svd/cmsis-svd-data